如何刪除Win 7系統保留100MB分區?


如何刪除Win 7系統保留100MB分區?

以下方法,是用於安裝完Win 7系統後,如何在系統內刪除在安裝時自動生成的100MB的HDD分區。

經筆者做白老鼠親測驗證有效!

1. Open CMD(*以系統管理員身分開啟CMD)

2. Type DISKPART (enter).(輸入DISKPART後確定,進入DISKPART硬碟工具)

3. Type LIST DISK (enter).(輸入LIST DISK後確定)

4. Choose the disk that contains your WinRE partition. If it is disk zero, you type SELECT DISK 0.(選擇100MB的WinRE分區所在的硬碟,通常為DISK 0,即輸入SELECT DISK 0後確定)

5. Type LIST PARTITION.(輸入LIST PARTITION後確定)

6. Select the 100MB (or 200MB, depending) partition. If it were partition 1, you would type SELECT PARTITION 1 (enter).(選擇100MB的WinRE分區所在的分區,通常為PARTITION 1 ,即輸入SELECT PARTITION 1後確定)

7. Type DETAIL PARTITION. Examine details to make sure this is the 100/200MB WinRE partition.(輸入DETAIL PARTITION後確定,查看這個分區的內容,確保選擇了正確WinRE分區)

8. Type INACTIVE to make this no longer the active, bootable partition.(輸入INACTIVE 後確定,將其轉成不能開機)

9. Now select your Windows disk – the one you want to boot from. If it is partition 2, you’ll type SELECT PARTITION 2.(接下來,選擇Windows開機所在的硬碟,通常為同一個硬碟的PARTITION 2 ,即輸入SELECT PARTITION 2後確定)

10. Again examine details with DETAIL PARTITION.(輸入DETAIL PARTITION後確定,查看這個分區的內容,確保選擇了正確Windows所在的分區)

11. Once you’re sure, mark it active with the command ACTIVE.(確定選擇後,輸入ACTIVE 後確定,將其轉成可以開機)

12. Type EXIT to get out of Diskpart. You’re back at the commandline.(輸入EXIT後確定,退出DISKPART工具)

13. You need to be sure there are system files on the new bootloader drive. if that drive is C:, you will put them there with this command: BCDBOOT c:\windows /s C: (you can use BCDBOOT /? to learn the other options available.)(注意!你必須確保新的可開機硬碟分區具備開機所需的相關系統文件,這樣系統才能正常開機。若該分區為C:,請輸入BCDBOOT c:\windows /s C: 後確定。此外,也可輸入BCDBOOT /?查看更多與該命令相關的信息)

14. Now reboot the machine.(英文裡少了一個命令,即輸入EXIT後確定,退出CMD。之後重新開機。)

15. When it comes back, use Disk Manager to delete the old 100/200MB partition. You’re done, though I recommend a reboot to test.(重新開機後,進入Windows 7裡的磁盤管理工具,將該多餘的100MB分區刪除。再重新開機一次即大功告成!)

額外:
16. 分區是拿回來了,但這一100MB的空白區域也要合併到其它分區才可以被系統所使用。

17. 在這裡,筆者使用的是一款免費的分區管理軟件:Partition Wizard Home Edition。因為其支援Win 7 64bit版本,而且簡單易用。(請務必「以管理員身分執行」,否則不成功。具體步驟略)

2 則迴響

  1. nono said,

    五月 13, 2013 於 11:26

    13. You need to be sure there are system files on the new bootloader drive. if that drive is C:

    板主你哩句意思係咪 要先將100Mb 系統保留文件 先copy 出黎..copy 去c drive 先至可以inactive 呀?

    因為你(你必須確保新的可開機硬碟分區具備開機所需的相關系統文件,這樣系統才能正常開機) 所謂既 (具備開機所需的相關系統文件) 我唔明..麻煩解答


發表迴響

在下方填入你的資料或按右方圖示以社群網站登入:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / 變更 )

Twitter picture

You are commenting using your Twitter account. Log Out / 變更 )

Facebook照片

You are commenting using your Facebook account. Log Out / 變更 )

Google+ photo

You are commenting using your Google+ account. Log Out / 變更 )

連結到 %s

%d 位部落客按了讚: